Blog

Hydrojetting and sewer line repair solve different problems. Learn how symptoms and camera findings can point to the right service.

A sewer camera inspection can reveal roots, broken pipe, offsets, buildup, and recurring backup causes before repair decisions are made.

California homeowners spend a lot of time thinking about earthquake preparedness in terms of supplies: water, food, flashlights, first aid kits. Far fewer think about the plumbing in their homes,

If your Los Angeles home was built or remodeled between 1978 and 1995, there is a real chance your water supply lines are made of polybutylene, a gray plastic plumbing

The single most important thing every Los Angeles homeowner can know about their plumbing is where the main water shutoff valve is and how to turn it off. Not in

Quick Answer: A water heater pilot light that keeps going out is most commonly caused by a failing thermocouple, a dirty or clogged pilot tube, or a draft near the

Quick Answer: A slow bathroom sink drain is almost always caused by a combination of hair, soap scum, and toothpaste buildup inside the drain stopper mechanism and the P-trap. The

Quick Answer: Water pooling under your water heater can come from three sources: the drain valve at the bottom of the tank, the temperature and pressure (T&P) relief valve discharge

Quick Answer: A toilet that keeps running after flushing is usually caused by a worn flapper valve, a faulty fill valve, or an improperly adjusted float. The flapper is the

Quick Answer: If a pipe is leaking under your sink, the first step is to turn off the water supply using the shut-off valves located directly below the sink. Place

Quick Answer: A sewage smell from a drain is almost always caused by a dried-out P-trap, a blocked vent pipe, or a buildup of bacteria and organic debris inside the

Quick Answer: Low water pressure in your entire house is usually caused by a partially closed main shut-off valve, corroded galvanized supply pipes, a failing pressure regulator, or mineral buildup